Matt
Admin
Admin
| Posts: 483 |  |
|
Re:diff mapping... - 2007/11/15 18:07
Yes, it did. There should only be like 9 input wires. Tee off them, and run them to the appropriate pin on the input connetor. It's weird doing it for the first time, but pretty simple. The output is power to a relay, and from the relay 14 volts to the center diff controler, and the output might even utilize the stock wiring
The biggist problem will be finding the wires to tee off from. If you can't find them, just connect them all to the ground, that's where all the power goes anyway. It's what your mother always said about keeping your peas out of your mash potatoes, they all end up together in your stomach anyway. 
The ECU has a crap load of inputs, and a ton of outputs, but a diff contoler is a relativly simple beast comparitivly.
|
Forums
